Skip to content
MAXHUB logo

All-in-one LED displays · Indoor · COB

MAXHUB Raptor Series V3 LiteNew

A 31 mm-deep all-in-one LED with a 6 mm bezel in 135 and 162 inches, COB or SMD, on Android 13.

  • 135"
  • 162"
Manufacturer product photography, not a CSH installation.

All-in-one LED displays

Overview

Raptor V3 Lite is the slimmest of MAXHUB's all-in-ones: 31 mm deep, with a 6 mm bezel and a 98.8 % screen-to-body ratio, so the picture reads as part of the wall. It comes in 135 inches (Full HD) and 162 inches, in COB at 600 nit and 15,000:1 contrast, or SMD at 550 nit. MAXHUB's own 3-in-1 hub board combines control, distribution and power in one module, so there are fewer cables and no racks or power cabinets. It runs Android 13, shares screens through MAXHUB Share, supports front maintenance with hot swapping, and is managed in the Pivot+ cloud. We recommend it where installation depth is limited.

Highlights

  • 31 mm deep, 6 mm bezel, 98.8 % screen-to-body
  • 135″ and 162″, COB or SMD
  • 3-in-1 hub board for control, distribution and power
  • Front maintenance with hot swapping
  • Pivot+ cloud management and MAXHUB Share

Specifications

From MAXHUB's official specifications, checked October 2026. Final specifications are confirmed in your quotation.

Sizes
135″ · 162″
Resolution
1920 × 1080 · 2304 × 1296 (162″ COB)
Brightness
600 nit (COB) · 550 nit (SMD)
Contrast ratio
15,000:1 (COB) · 6,500:1 (SMD)
Refresh rate
3,840 Hz
Viewing angle
170° (COB) · 160° (SMD)
Operating system
Android 13 (8-core, 4 GB / 64 GB)
Inputs
HDMI × 2 · USB 3.0 · RS232 · RJ45 · Bluetooth 5.3
Depth
31 mm
Dimensions (135″)
3,012 × 1,699.5 × 31 mm

Models and pixel pitches

Models

  • LP135V07C (COB)
  • LP135F07 (SMD)
  • LP162V12C (COB)
  • LP162F07 (SMD)

Sizes

  • 135"
  • 162"

All-in-one LED displays

Interested in MAXHUB Raptor Series V3 Lite?

Send your site details and we'll confirm the right model and specification in a quotation.